Scielo RSS http://scielo.pt/rss.php?pid=0872-190420110006&lang=pt vol. 29 num. 6 lang. pt http://scielo.pt/img/en/fbpelogp.gif http://scielo.pt http://scielo.pt/scielo.php?script=sci_arttext&pid=S0872-19042011000600001&lng=pt&nrm=iso&tlng=pt New imidazolium-based ionic liquids and some pyridinium-based ionic liquids, were tested as corrosion inhibitors of steel in 1.0 M HCl using potentiodynamic polarization, linear polarization and weight loss methods. The obtained results showed that all of the four ILs are good inhibitors for steel in 1.0 M HCl and the inhibition efficiency increased with increasing the inhibitor concentration. All of the ILs act as mixed-type inhibitors. Obtained results from Tafel polarization, linear polarization and weight loss are in good agreement with each other. The adsorption of the four ILs inhibitors, obey the Langmuir adsorption isotherm. From the adsorption isotherm, values of ΔGads for the adsorption process were calculated. The effect of temperature on the corrosion behavior of steel in presence of 1 × 10-3 M of compound II was studied in the temperature range 298-338 K. http://scielo.pt/scielo.php?script=sci_arttext&pid=S0872-19042011000600002&lng=pt&nrm=iso&tlng=pt The corrosion inhibition characteristics of nitrogen containing amino acid L-tryptophan on mild steel in 0.1 M HCl solution, in the temperature range of 30-50 °C, was studied by weight loss and potentiodynamic polarization measurements. L-tryptophan significantly reduces the corrosion rates of mild steel; the maximum inhibition efficiency being 83% at 50 °C in presence of inhibitor concentration of 500 ppm. The effect of the addition of very small concentrations of anionic surfactant, sodium dodecyl sulfate (SDS), and of cationic surfactant, cetyl trimethyl ammonium bromide (CTAB), on the corrosion inhibition behavior of L-tryptophan was also studied. The inhibition efficiency (IE) of L-tryptophan significantly improved in presence of both surfactants. The effect of SDS and CTAB on the corrosion inhibition behavior of L-tryptophan appears to be synergistic in nature, the values of synergism parameter being greater than unity. The adsorption of inhibitors on mild steel surface obeyed Langmuir's adsorption isotherm. The calculated thermodynamic parameters for adsorption reveal a strong interaction between the inhibitors and the mild steel surface. The results obtained by electrochemical studies are consistent with the results of the weight loss measurements. L-tryptophan acts more anodic than cathodic inhibitor. http://scielo.pt/scielo.php?script=sci_arttext&pid=S0872-19042011000600003&lng=pt&nrm=iso&tlng=pt The effect of extract of Musa paradisiaca on corrosion inhibition of mild steel in aqueous 0.5 M sulphuric acid was investigated by weight loss method, potentiodynamics polarisation technique and electrochemical impedance spectroscopy (EIS). The inhibition efficiency is found to increase with increase in concentration of the extract. Polarization measurement indicates that Musa paradisiaca acts as a mixed- type inhibitor and the inhibition efficiency decreases with rise in temperature. The inhibition is assumed to occur via adsorption of inhibitor molecules on metal surface, which obeys Langmuir adsorption isotherm. The activation energy (Ea) and other thermodynamic parameters for inhibition process were calculated. These thermodynamic parameters indicate a strong interaction between the inhibitor and the mild steel surface. SEM and AFM studies confirmed the adsorption of inhibitor molecules on mild steel surface. http://scielo.pt/scielo.php?script=sci_arttext&pid=S0872-19042011000600004&lng=pt&nrm=iso&tlng=pt The inhibitive effect of Ocimum gratissimum by seed extract on the corrosion of zinc - aluminium (ZA) alloy in 2 M hydrochloric acid (HCl) solution has been studied using gravimetric methods. Inhibition increases with concentration of extract but decreases with temperature. This observation implies that Ocimum gratissimum seed extract is an effective and non toxic inhibitor of the corrosion of zinc - aluminium alloy. Adsorption of the extract on the surface obeyed the Freundlich adsorption isotherm. The calculated rate constant (k) shows a first order kinetics in the absence and presence of the inhibitor. The kinetic parameter B, measured for the reaction has a high negative value which implies that Ocimum gratissimum becomes more effective as the temperature increases. Synergistic effect of halide additives shows an increase in the efficiency of the extract. However synergism parameter shows that synergism of halide additives decreases with increased concentration of inhibitor. http://scielo.pt/scielo.php?script=sci_arttext&pid=S0872-19042011000600005&lng=pt&nrm=iso&tlng=pt The inhibition efficiency (IE) of phyllanthus amarus extract (PAE)-Zn2+ system, in controlling corrosion of carbon steel in an aqueous solution containing 60 ppm of Cl-, has been evaluated by weight loss method. Weight loss study reveals that the formulation consisting of 2 mL of PAE and 25 ppm of Zn2+ has 98% inhibition efficiency in controlling corrosion of carbon steel immersed in an aqueous solution containing 60 ppm of Cl-. Synergistic parameters suggest that a synergistic effect exists between PAE and Zn2+. Polarization study reveals that this system functions as mixed type of inhibitor controlling the cathodic reaction and anodic reaction to an equal extend. AC impedance spectra reveal that a protective film is formed on the metal surface. The FTIR spectra reveal that the protective film consists of Fe2+-phyllanthus complex. http://scielo.pt/scielo.php?script=sci_arttext&pid=S0872-19042011000600006&lng=pt&nrm=iso&tlng=pt The inhibition action of 3-ethyl-4-amino-5-mercapto-1,2,4-triazole (EAMT) on the corrosion of 6061-Al alloy in different concentrations of aqueous sodium hydroxide solution has been investigated at different temperatures, using potentiodynamic polarization and electrochemical impedance spectroscopic techniques. The surface morphology of the metal surface was investigated by scanning electron microscopy (SEM). The experimental results showed that the presence of EAMT in sodium hydroxide solution decreases the corrosion rates and the corrosion current densities (icorr), and increases the charge transfer resistance (Rp). It was found that the inhibitor efficiency depends on the concentration of the inhibitor, concentration of the corrosive media and temperature. The inhibition was assumed to occur through adsorption of the inhibitor molecule on the metal surface. The adsorption of the inhibitor on the metal surface is found to obey Langmuir adsorption isotherm. EAMT acts as a mixed inhibitor. Thermodynamic parameters for the adsorption processes were determined from the experimental data. The results obtained from both the techniques are in good agreement.