Scielo RSS http://scielo.pt/rss.php?pid=0872-190420170004&lang=pt vol. 35 num. 4 lang. pt http://scielo.pt/img/en/fbpelogp.gif http://scielo.pt http://scielo.pt/scielo.php?script=sci_arttext&pid=S0872-19042017000400001&lng=pt&nrm=iso&tlng=pt This work ultimately pays careful consideration to a method that respects the environment, and that can be developed across the accumulation of research to reduce the corrosion of metals in sea water. Extracts of Ziziphus lotus (wild jujube) were tested as a corrosion inhibitor of copper in sea water, using polarization methods and weight loss measurements. We also present by SEM the morphology of copper surface analyzed after immersion in inhibited and uninhibited electrolytes. The inhibition efficiency of Ziziphus lotus extracts was calculated and compared. We note good agreement between these methods. The obtained results revealed that the tested inhibitor significantly reduced the kinetics of the corrosion process of copper. Its efficiency increases with the concentration, and attained 93% at 5 g/L. The effect of temperature on the corrosion behavior of copper in natural sea water was also studied in the range of 293 K and 323 K, to determine thermodynamic data of activation. http://scielo.pt/scielo.php?script=sci_arttext&pid=S0872-19042017000400002&lng=pt&nrm=iso&tlng=pt Four different herbal compounds, Anise (Pimpinella Anisum), Caraway (CARUM Carvi), Cumin (Cuminum Cyminum) and Hibiscus (Hibiscus Sabdarriffa) have been tested as green corrosion inhibitors for copper exposed to 0.5 M NaCl. The corrosion inhibition has been studied using electrochemical noise analysis (EN) and electrochemical impedance spectroscopy (EIS). The comparative analysis of the results obtained showed that EN is an effective tool for screening of new corrosion inhibitors. Analysis of noise data demonstrated the need of removal of the trends in the potential and current fluctuations during the measurement periods. The results gathered showed very good inhibition efficiency. Generally, EN showed a good correlation with EIS in this study. http://scielo.pt/scielo.php?script=sci_arttext&pid=S0872-19042017000400003&lng=pt&nrm=iso&tlng=pt In the present work, the inhibitory properties and the adsorption mechanism of penicillin G for the corrosion of Fe-19Cr stainless steel in an HCl solution were investigated. Electrochemical methods, the open circuit potential (OCP) and the current potential curves (I-V) were used. The inhibition efficiency of the penicillin G was calculated and found to be up to 60% for hydrochloric acid. The adsorption of this inhibitor was described by Langmuir isotherm, and the negative values of Gibbs energy indicate the nature of interactions between the inhibitor molecules and the metal surface. http://scielo.pt/scielo.php?script=sci_arttext&pid=S0872-19042017000400004&lng=pt&nrm=iso&tlng=pt The electro active inorganic-organic nanohybrid material Polyaniline-BaMnO3 has been synthesized by the surfactant assisted chemical polymerization reaction of aniline with nanocrystalline BaMnO3. Electrochemical studies have been performed using cyclic voltammetry and galvanostatic charge-discharge measurements. The enhanced electrode performance originates from the synergistic effect of PANI and BaMnO3. The hybrid delivers very high specific capacitance of 560.5 Fg-1, energy density of 32.01 whkg-1 and power density of 400 wkg-1, respectively. The hybrid also exhibits very high stability and excellent cycling performance with less than 5% capacity loss over 500 cycles. http://scielo.pt/scielo.php?script=sci_arttext&pid=S0872-19042017000400005&lng=pt&nrm=iso&tlng=pt New quinoline, namely 5-(ethoxymethyl)-8-quinolinol (M-QN), has been synthesized and characterized by different spectral methods, such as 1H NMR, 13C NMR and IR spectra. Its inhibitive action against the corrosion of carbon steel in 1.0 M hydrochloric acid solution was investigated at different temperatures in the range from 25±2 to 55±2 °C by a series of known techniques, such as weight loss, open circuit potential (OCP), electrochemical impedance spectroscopy (EIS) and Tafel polarization measurements. The inhibition efficiencies obtained from all employed methods are in good agreement with each other. The obtained results show that M-QN compound is a very good inhibitor with an efficiency of 97.7 % at 10-3 M additive concentration in a 1.0 M HCl solution. The inhibition efficiency increased with an increase of the inhibitor's concentration. Changes in impedance parameters (Rct and Cdl) were indicative of adsorption of the compound (M-QN) on the metal surface, leading to the formation of a protective film. Tafel polarization measurements showed that M-QN inhibitor is of a mixed type. The adsorption of the inhibitor on the surface of carbon steel in a 1.0 M HCl solution was found to obey Langmuir's adsorption isotherm. The kinetic and thermodynamic parameters for carbon steel corrosion and inhibitor adsorption, respectively, were determined and discussed. On the bases of thermodynamic adsorption parameters, comprehensive adsorption (physisorption and chemisorption) for the studied inhibitors on carbon steel surface was suggested.