Services on Demand
Journal
Article
Indicators
- Cited by SciELO
- Access statistics
Related links
- Similars in SciELO
Share
Portugaliae Electrochimica Acta
Print version ISSN 0872-1904
Port. Electrochim. Acta vol.26 no.3 Coimbra 2008
Comparative Study of Corrosion Behavior of AA2014/15 Vol%Al2o3p and AA2009/20 Vol% SiCw
S.B. Jamaludin,*Z. Yusoff, K.R. Ahmad
School of Materials Engineering, University Malaysia Perlis, Kompleks Pusat Pengajian 2, Taman Muhibbah, Jejawi, 02600 Arau, Perlis, Malaysia
Received 26 September 2007; accepted 8 November 2007
Abstract
The influence of heat treatment on the corrosion behavior of two aluminium matrix composites (AA2014/15 vol% Al2O3p - composite A and AA2009/20 vol% SiCw -composite B) was analyzed in 3.5% sodium chloride solution. The kinetic of the corrosion process was studied based on the gravimetric measurements. The corrosion damage and pit shape were analyzed by Image Analyzer. The corrosion damage in both composites was caused by the pitting attack on the surface. Pit shape of the composite A is different to the composite B. The corrosion rate of composite A is higher than composite B because the voids or gap between reinforcement particles and matrix are larger than in the composite B. The main attack of nucleation sites was at the interface region of the matrix and the reinforcement.
Keywords: aluminum matrix composite, corrosion, heat treatment.
Texto disponível em PDF
Full text only in PDF format
References
1. M. Edson, Cintho, Lalgudi, V. Ramanathan, Proceedings of ICCM-10, Whistler, B.C., Canada, August 1995. [ Links ]
2. M. Manoharan, J.J. Lewandowski, Scripta Metalurgica 23 (1988) 301.
3. J.M. Molina, R.A. Saravanan, J. Narciso and E. Louis, Materials Science and Engineering A 383 (2004) 299.
4. A. Weiland, L. Hultman, U. Wahlstrom, C. Perrson and T. Johannesson, Acta Materialia 15 (1998) 5271.
5. M.G. Fontana. “Corrosion Engineering”, 3rd Edition, McGraw Hill (1987).
6. K.C. Chan and G.Q. Tong, Materials Letter 44 (2000) 39.
7. K.C. Chan and G.Q. Tong, Scripta Materilia 31 (1997) 1917.
8. K.C. Chan and G.Q. Tong, Journal of Materials Processing Technology 74 (1998) 142-146.
9. K.C. Chan and B.Q. Han, Proceedings of 11th International Conference on Composite Materials, Gold Coast,Australia (1997).
10. T.M. Yue, Journal of Materials Science Letter 19 (2000) 1003.
11. A. Pardo, M.C. Merino, S. Merino, F. Viejo, M. Carboneras, R. Arrabal, Corrosion Science 47 (2005) 1750.
12. K.A. Lucas and H. Clarke, “Corrosion of Aluminium-based Metal Matrix Composite”, John Willey and Sons, Inc. (1992).
13. T. Otani, B. McEnaney and V.D. Scott, “Corrosion of Metal Matrix Composites”, in Conference Proceeding Cast Reinforce Metal Composites, Chicago, USA, (1988) 383.
14. D.M. Aylor and P.J. Moran, J. Electrochem. Soc. 132 (1985) 1277.
15. A.R. Champion, W.H. Krueger, H.S. Hartmann and A.K. Dhingra, International Conference on Composite Materials, Canada, (1978) 883.
16. A.J. Trowsdale, B. Noble, S.J. Harris, I.S.R. Gibbins, G.E. Thompson and G.C. Wood, Corrosion Science 38 (1996) 177.
17. P.R. Roberge, “Handbook of Corrosion Engineering” MacGraw-Hill , 1999.
*Corresponding author. E-mail address: sbaharin@unimap.edu.my