Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Similares en SciELO
Compartir
Portugaliae Electrochimica Acta
versión impresa ISSN 0872-1904
Resumen
AHMED, Abdel-Moneim M.; EL BATOUTI, Mervette y KHELIL, Said M. Said. Electropolishing of Metallic Surfaces and the Factors Influencing on the Limiting Current. Port. Electrochim. Acta [online]. 2015, vol.33, n.2, pp.105-110. ISSN 0872-1904. https://doi.org/10.4152/pea.201502105.
Anodic limiting currents were measured in an unstirred divided cell at an inclined small scale anode using a large scale cathode with angles of inclination from vertical axis as 45, 60 and 75°. Anode heights (II) vary from 1 cm to 6 cm and phosphoric acid concentration from 6 to 10 moles. Limiting currents for electropolishing of copper were between 5 and 58 mA.cm-2 depending on the operating conditions. A general correlation of data of all inclinations was obtained using the equation: I = 28.57(Θ0.520.C -0.89.H -0.91) with an average deviation of ±4%.
Palabras clave : Limiting current; electropolishing; metallic surfaces.