20 1-2Fatigue behaviour of a structural steel under non-proportional multiaxial loadingFatigue life prediction of shot peened components 
Home Page  

  • SciELO

  • SciELO


Ciência & Tecnologia dos Materiais

 ISSN 0870-8312

BUCIUMEANU, M.; MIRANDA, A.S    SILVA, F.S.. Effect of relative displacement and normal contact load on fretting fatigue behaviour of ti6al4v alloy. []. , 20, 1-2, pp.92-98. ISSN 0870-8312.

^len^aThe main objective of this work is to study the fretting fatigue behaviour of Ti6Al4V in contact with a dissimilar mating material 34CrNiMo6 steel, using a sphere-on-plane configuration. There are a significant number of parameters that may affect fretting fatigue. Relative displacement amplitude and normal contact load are usually considered the most relevant ones. Thus, the role of relative displacement amplitude and normal load on fretting fatigue, life is presented. When the Ti6Al4V alloy is subjected to fretting fatigue the fatigue life drastically reduces as compared to the traditional plain fatigue case. In order to study this detrimental effect of fatigue life tests of both plain fatigue and fretting fatigue were carried out, highlighting the synergic effect between fatigue and fretting. Three different normal loads were used in the experiments. The relative displacement amplitude was changed by varying the tangential load. The fretting fatigue experiments were carried out in a fretting fatigue apparatus assembled on a servo hydraulic fatigue testing machine. In addition to the experimental work a nonlinear analysis using ABAQUS was carried out to determine the influence of the normal load on fretting fatigue behaviour. It was verified the strong dependence of fretting fatigue life on the two studied variables, namely the relative displacement amplitude and the normal contact load.^lpt^aO principal objectivo deste trabalho é o estudo do comportamento da fadiga com ‘fretting’ da liga de Ti6Al4V em contacto com uma liga de aço 34CrNiMo6, utilizando a configuração esfera - plano. Há um número significativo de parâmetros que podem afectar a vida de fadiga com ‘fretting’. A amplitude de deslocamento relativo e a carga normal do contacto são considerados parâmetros mais relevantes. Quando a liga de Ti6Al4V é submetida a fadiga com ‘fretting’ a vida da fadiga reduz drasticamente em comparação com o caso de fadiga tradicional. O objectivo deste estudo foi observar o efeito negativo do ‘fretting’ na vida de fadiga e para isso foram realizados testes tradicionais de fadiga e testes de fadiga com ‘fretting’. Há que realçar os efeitos sinergéticos entre a fadiga e o ‘fretting’. Além do trabalho experimental foi realizada uma análise não linear com Abaqus para determinar a influencia da carga normal no comportamento da fadiga com ‘fretting’. Foi verificada a forte dependência da vida de fadiga com ‘fretting’ com as duas variáveis estudadas, nomeadamente a amplitude de deslocamento relativo e a carga normal de contacto.

: .

        · | |     ·     · ( pdf )