ser2 16 
Home Page  

  • SciELO

  • SciELO


Cadernos do Arquivo Municipal

 ISSN 2183-3176

PAVIA, Sara. Origin and technology of the Georgian brick at Fade Mansion, Dublin, built c. 1728. []. , ser2, 16, pp.47-62.   01--2021. ISSN 2183-3176.

^a

Este artigo estuda a proveniência e tecnologia de cozedura do tijolo da Fade Mansion. A microestrutura foi estudada com microscopia eletrónica de varrimento (SEM), as associações e transformações minerais foram determinadas com difração de raios-X (XRD) e análise petrográfica. Os resultados mostram que os tijolos foram fabricados com argila sem carbonatos, de origem glácio-fluvial, obtida localmente. Isso está em conformidade com a posição da mansão num terraço do rio Liffey, e com investigações anteriores sobre tijolos de argila históricos. Estes foram cozidos em fornos com uma atmosfera oxidante. As ‘rubbers’ (tijolos artesanais) das janelas atingiram temperaturas inferiores, o que resultou em baixa vitrificação, levando ao desgaste. As estruturas iniciais de vitrificação coincidem com a presença de minerais das argilas, indicando temperaturas de cerca de 800°C. A vitrificação contínua está associada ao desaparecimento de minerais de argila, à sinterização de hematite e/ou fases de alta temperatura e à transformação de muscovite, indicando uma ampla faixa de temperatura >950-1200°C que corrobora com as propriedades inconsistentes do tijolo.

^lpt^a

This paper studies the provenance and firing technology of the Fade Mansion brick. The microstructure was studied with scanning electron microscopy (SEM), mineral associations and transformation were determined with X-ray diffraction (XRD) and petrographic analyses. The results evidenced that the bricks were made with a decalcified, silica-based clay of glacio-fluvial origin, gathered locally. This agrees with the position of the Mansion on a terrace of the River Liffey, and with previous research on historic bricks made with boulder clay. They were fired in kilns in an oxidising atmosphere. The rubbers at window heads reached lower temperatures which resulted in low vitrification, leading to weathering. Initial vitrification structures generally concur with the occurrence of clay minerals, indicating temperatures of c. 800°C. Continuous vitrification is associated to the disappearance of clay minerals, the sintering of hematite and/or high-temperature phases and mica transformation, indicating a wide temperature range >950-1200°C, which agrees with the inconsistent brick properties.

^len

: .

        · | |     · |     · ( pdf )