SciELO - Scientific Electronic Library Online

 
vol.25 número4Comparison of Admittance Plots for Glass Carbon (GC) and Edge Plane Pyrolytie Graphite (EPPG) Electrodes in Three Typical Kinds of Electrolytes índice de autoresíndice de assuntosPesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Portugaliae Electrochimica Acta

versão impressa ISSN 0872-1904

Port. Electrochim. Acta v.25 n.4 Coimbra  2007

 

Zinc-Nickel Alloy Electrodeposition – Influence of Triethanolamine

V. Ravindran *and V.S. Muralidharan

 Central Electrochemical Research Institute, Karaikudi 630 006, Tamil Nadu, India

 

Received 16 January 2006; accepted 19 November 2006

 

 

Abstract

Compared to pure zinc plating, zinc alloys provide several advantages. A zinc alloy generally offers superior sacrificial protection to steel since it corrodes more slowly than pure zinc. A search for a non-cyanide zinc plating bath resulted on the development of a zinc nickel sulphamate bath. To obtain better quality zinc-nickel deposits, triethanolamine was added to the bath. In this paper the influence of triethanolamine in zinc-nickel plating from sulphamate bath has been investigated through current efficiency measurements, cyclic voltammetry, scanning electron microscope, and X-ray diffraction techniques. In the presence of triethanolamine in the zinc-nickel sulphamate bath the current efficiency of alloy deposition increased to a maximum of 99% at the current density of 1.5 Adm-2 and thereafter decreased. TEA adsorbed on the electrode surface obeying Henry’s isotherm. On mild steel surfaces, uniform smooth slate gray deposit with smaller crystallites was produced, in presence of TEA in solution, and the electrodeposits exhibited additional Zn(OH)2 and g-Ni3Zn22 phases. Hydrogen evolution was suppressed by TEA and thereby current efficiency is increased for alloy deposition.

 

Keywords: cyclic voltammetry, electrodeposition, triethanolamine, XRD, Zn-Ni.

 

Texto disponível em PDF

Full text only in PDF format

 

 

References

1. N.R. Short, A. Abibsi and J.K. Dennis, Trans. Inst. Met. Finish 67 (1989) 73.

2. N. Zaki, Met. Finish June 1989, 57.

3. D.E. Hall, Plating Surf. Finish Nov 1983, 59.

4. A. Brenner, “Electrodeposition of Alloys — Principles and Practice” (Academic Press), N.Y., 1983.        [ Links ]

5. H. Dahms and J. Croll, J. Electrochem. Soc. 112 (1965) 77.

6. Hwa Young Lee and Sung Gyu Kim, Surface and Coatings Technology 135 (2000) 69.

7. A. Aragon, M.G.F. Figuerroa and E. Gana, J. Appl. Electrochem. 22 (1992) 558.

8. V. Ravindran and V.S. Muralidharan, Bull. Electrochem. 16 (2000) 60.

9. S. Shabana Begum, C. Sivakumar, S.M. Mayanna and V.S. Muralidharan, Portugaliae Electrochimica Acta 18 (2000) 89.

10. S. Shabana Begum, V.S. Muralidharan and S.M. Mayanna, Portugaliae Electrochimica Acta 19 (2001) 121.

11. V.S. Vasantha, M. Pushpavanam, P. Kamaraj and V.S. Muralidharan, Trans. Inst. Met. Fin. (U K) 74 (1996) 28.

12. A.J. Rathinam, G.N.K. Ramesh Bapu and V.S. Muralidharan, Trans. SAEST 37 (2002) 149.

13. C. Sivakumar, V.S. Muralidharan, S. Shabana Begum and S.M. Mayanna, Indian J. Chem. Tech. 7 (2000) 202.

 

* Corresponding author. E-mail address:  visalakshi47@yahoo.com

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons