SciELO - Scientific Electronic Library Online

 
vol.26 número2O climatograma de Lisboa segundo uma norma ETSInibição da corrosão de ligas cu-Fe em soluções de HCl através de surfactantes anfotéricos índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Corrosão e Protecção de Materiais

versión impresa ISSN 0870-1164

Resumen

OLIVEIRA, Nilson T. C.  y  GUASTALDI, António C.. Electrochemical studies on Ti-Mo alloys of interest to biomaterials . Corros. Prot. Mater. [online]. 2007, vol.26, n.2, pp.46-52. ISSN 0870-1164.

Ti alloys are being developed to be used in orthopedic implants due their mechanical properties, biocompatibility and corrosion resistance. At this paper are reported electrochemical studies on the as-cast Ti-Mo alloys with 6, 10 and 20 Mo (wt.%), in 0.15 mol/L Na2SO4 solution and Ringer physiological solution. Analyses of the rest-potential indicated that all alloys present the same tendency to a spontaneous passivation, while cyclic voltammograms showed not transpassivation up to potentials of 8,0 V (vs ECS), indicating high corrosion resistance. The comparison among open-circuit profiles of the anodic oxides growth in Ringer and Na2SO4 solutions, are showing that the presence of chloride ions during the anodization is not influencing the oxides chemical stability.

Palabras clave : Ti-Mo alloys; Corrosion; Biomaterials; Implants.

        · resumen en Portugués     · texto en Portugués     · Portugués ( pdf )