SciELO - Scientific Electronic Library Online

 
vol.26 número2O climatograma de Lisboa segundo uma norma ETSInibição da corrosão de ligas cu-Fe em soluções de HCl através de surfactantes anfotéricos índice de autoresíndice de assuntosPesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Corrosão e Protecção de Materiais

versão impressa ISSN 0870-1164

Resumo

OLIVEIRA, Nilson T. C.  e  GUASTALDI, António C.. Electrochemical studies on Ti-Mo alloys of interest to biomaterials . Corros. Prot. Mater. [online]. 2007, vol.26, n.2, pp.46-52. ISSN 0870-1164.

Ti alloys are being developed to be used in orthopedic implants due their mechanical properties, biocompatibility and corrosion resistance. At this paper are reported electrochemical studies on the as-cast Ti-Mo alloys with 6, 10 and 20 Mo (wt.%), in 0.15 mol/L Na2SO4 solution and Ringer physiological solution. Analyses of the rest-potential indicated that all alloys present the same tendency to a spontaneous passivation, while cyclic voltammograms showed not transpassivation up to potentials of 8,0 V (vs ECS), indicating high corrosion resistance. The comparison among open-circuit profiles of the anodic oxides growth in Ringer and Na2SO4 solutions, are showing that the presence of chloride ions during the anodization is not influencing the oxides chemical stability.

Palavras-chave : Ti-Mo alloys; Corrosion; Biomaterials; Implants.

        · resumo em Português     · texto em Português     · Português ( pdf )