SciELO - Scientific Electronic Library Online

 
vol.20 número1-2Obtaining the cohesive laws of a trapezoidal mixed-mode damage model using an inverse methodEffect of relative displacement and normal contact load on fretting fatigue behaviour of ti6al4v alloy índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ciência & Tecnologia dos Materiais

versión impresa ISSN 0870-8312

Resumen

REIS, Luís; LI, Bin  y  FREITAS, Manuel de. Fatigue behaviour of a structural steel under non-proportional multiaxial loading. C.Tecn. Mat. [online]. 2008, vol.20, n.1-2, pp.87-91. ISSN 0870-8312.

This paper reports experimental studies on the fatigue behaviour of 42CrMo4 steel under non-proportional loading conditions. Although the 42CrMo4 steel is widely used in complex stressed components such as shafts, etc, most of the studies in the literature were on the uni-axial fatigue behaviour of this steel. The objective of this work is to study the mechanical behaviour of the steel 42CrMo4 under specified multiaxial fatigue loading conditions, which will allow a better understanding of the ratio between normal and shear stress, and validate the fatigue damage models. A series of tests were carried out in load control for several multiaxial fatigue loading paths. Experimental results show that the ratio between normal stress and shear stress components has a strong influence to fatigue damage and consequently to fatigue life. Multiaxial fatigue damage models based on the shear stress amplitude are applied to correlate the test results, improved correlation results are shown.

Palabras clave : Multiaxial fatigue; Non-proportional loading; Plasticity; Cyclic hardening; Multiaxial Fatigue models.

        · resumen en Portugués     · texto en Inglés     · Inglés ( pdf )