SciELO - Scientific Electronic Library Online

 
vol.27 issue3Mass Transport and Potential Studies in a Flow-through Porous Electrode Reactor: A Comparative Study of Reticulated Vitreous Carbon and Graphite Felt Used as CathodeElectrochemical Remediation at Laboratory Scale of the Coal Dump in Paz de Rio (Colombia) author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Portugaliae Electrochimica Acta

Print version ISSN 0872-1904

Abstract

MARIN, Tiffany A.; ISAZA, Franklin J.  and  CALDERON, Jorge A.. Electrodeposition of Polypyrrol/Platinum Films. Port. Electrochim. Acta [online]. 2009, vol.27, n.3, pp.397-407. ISSN 0872-1904.

The fuel cells are new alternatives for energy production with low environmental impact. Nowadays, conducting polymers are considered the most promising material to manufacture these type of cells because of their easy application and operation, being polypyrrole (PPy) one of them. The electrochemical synthesis of single-layer polypyrrole and two-layers or multiple-layers polypyrrole/platinum (PPy/Pt) films is reported in this paper. The films were obtained by electropolymerisation of pyrrole and cathodic deposition of platinum from ammonium hexachloroplatinate salt on stainless steel 304. The composition, morphology, conductivity and the electrochemical properties of the films were study by Raman Spectroscopy, SEM, Profilometer, impedance and cyclic voltammetry. The possible use of PPy and PPy/Pt films as electrodes for fuel cells is also discussed.

Keywords : polypyrrole/platinum; conducting polymers; cyclic voltammetry.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License