32 4Nano Analyses of Adsorbed Film onto Carbon SteelBilayers Polypyrrole Coatings for Corrosion Protection of SAE 4140 Steel 
Home Page  

  • SciELO

  • SciELO


Portugaliae Electrochimica Acta

 ISSN 0872-1904

KHADRAOUI, A et al. Corrosion Inhibition of Carbon Steel in Hydrochloric Acid Solution by Mentha Pulegium Extract. []. , 32, 4, pp.271-280. ISSN 0872-1904.  https://doi.org/10.4152/pea.201404271.

The inhibition effect of Mentha pulegium extract (MPE) on the acid corrosion of carbon steel in 1 M HCl solution was investigated using weight loss, potentiodynamic polarisation, and electrochemical impedance spectroscopy. The results show that the Mentha pulegium extract is a good inhibitor, and that the inhibition efficiency depends on the concentration of the plant extract. Efficiency is higher than 88 % for 33% Mentha pulegium extract. Polarization measurements also show that Mentha pulegium extract is a good mixed inhibitor. The remarkable inhibition efficiency of MPE was discussed in terms of blocking of the electrode surface by adsorption of inhibitor molecules through active centres. Mentha pulegium extract is adsorbed on the carbon steel surface according to the Temkin adsorption model. The effect of temperature on the corrosion behaviour of carbon steel in 1 M HCl with addition of 33% MPE was studied in the temperature range 308-338 K. SEM also confirmed the adsorption of MPE on carbon steel surface.

: Mentha pulegium; Green Inhibitor; Adsorption; SEM; Carbon steel.

        ·     · ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License