Resumen

AHMED, Abdel-Moneim M.; EL BATOUTI, Mervette  y  KHELIL, Said M. Said. Electropolishing of Metallic Surfaces and the Factors Influencing on the Limiting Current. Port. Electrochim. Acta [online]. 2015, vol.33, n.2, pp.105-110. ISSN 0872-1904.  https://doi.org/10.4152/pea.201502105.

Anodic limiting currents were measured in an unstirred divided cell at an inclined small scale anode using a large scale cathode with angles of inclination from vertical axis as 45, 60 and 75°. Anode heights (II) vary from 1 cm to 6 cm and phosphoric acid concentration from 6 to 10 moles. Limiting currents for electropolishing of copper were between 5 and 58 mA.cm^-2 depending on the operating conditions. A general correlation of data of all inclinations was obtained using the equation: I = 28.57(Θ^0.520.C ^-0.89.H ^-0.91) with an average deviation of ±4%.

Palabras clave : Limiting current; electropolishing; metallic surfaces.

        · texto en Inglés     · Inglés ( pdf )