33 6Evaluation of the Performance of Pt-MWCNTs Nanocomposites Electrodeposited on Titanium for Methanol Electro-oxidationCorrosion Inhibition: Synergistic Influence of Gluconates on Mild Steel in Different Corrosive Environments. Synergetic Interactions of Corrosion Inhibition Tendency of Two Different Gluconates on Mild Steel in Different Corrosive Environments 
Home Page  

  • SciELO

  • SciELO


Portugaliae Electrochimica Acta

 ISSN 0872-1904

HIDOURI, S.; BACCAR, Z. M.; ERRACHID, A.    RUIZ-SANCHEZ, O.. High Sensitive and Selective Hydrogen Phosphate ISFET Based on Polyvinyl Chloride Membrane. []. , 33, 6, pp.343-351. ISSN 0872-1904.  https://doi.org/10.4152/pea.201506343.

The present work describes the preparation and characterization of polyvinyl chloride membrane doped with methyl-salin ionophore. This electrode was successfully used for selectivity and high sensibility of monohydroxiphosphate in aqueous solution. 1 μM detection limit of mono-hydrogen phosphate was obtained by using dibutyl phthalate and o-nitrophenyl octyl ether-poly vinyl chloride membrane in dynamic solution. The co-existence of a large excess of salts did not interfere with the detection in case of onitrophenyl octyl ether-poly vinyl chloride membrane that maked this selective electrode more adequate for the monohydrogen detection. Also, a highly selective and sensitive dihydrogen phosphate sensor was fabricated by autoassembly of polyvinyl chloride into silicium nitride gate of ISFET.

: Phosphate sensor; Sensitive; Ionophore; PVC; ISFET.

        ·     · ( pdf )