36 4Elaboration and Electrochemical Studies of the Coating Behavior of a New Nanofunctional Epoxy Polymer on E24 Steel in 3.5 % NaClCorrosion Inhibition of Mild Steel in a H2SO4 Solution by Piper Guineense Squeezed Extract 
Home Page  

  • SciELO

  • SciELO


Portugaliae Electrochimica Acta

 ISSN 0872-1904

ABDEL HAMEED, Reda S.. Cationic Surfactant - Zn2+ Systems as Mixed Corrosion Inhibitors for Carbon Steel in a Sodium Chloride Corrosive Medium. []. , 36, 4, pp.271-283. ISSN 0872-1904.  https://doi.org/10.4152/pea.201804271.

Benzyl dimethyl dodecyl ammonium chloride-zinc ion system, as quaternary ammonium salt (QA-Zn2+), was investigated as corrosion inhibitor for carbon steel in a 2.0 M sodium chloride solution, by different techniques such as weight loss, open circuit potential, potentiodynamic polarization and electrochemical impedance spectroscopic techniques. The inhibition efficiency of the used system (QA-Zn2+) increases with increasing mixed inhibitor concentrations and with rising temperatures. A synergistic effect exists between QA and Zn2+. Potentiodynamic polarization curves indicate that the used system mainly acts as an anodic mixed inhibitor. The polarization resistance values were (Rp) increased, and the interface capacitance (Cdl) was decreased in the mixed inhibitor system (QA- Zn2+) presence, more than in the case of individual inhibitors. The corrosion inhibition is due to the adsorption of (QA-Zn2+) onto the metal surface, and the formation of a barrier film that separates the metal from the corrosive medium. The maximum inhibition efficiency of 98% was obtained at 200 QA and 50 ppm Zn2+ of the mixed inhibitor system, due to a synergistic effect.

: steel corrosion inhibitors; surfactant; quaternary ammonium salt; synergistic effect; EIS.

        ·     · ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License