SciELO - Scientific Electronic Library Online

 
vol.26 número3Sensor de cloretos para monitorização In-Situ de estruturas de betão armadoDesempenho de componentes metálicos em edifícios índice de autoresíndice de assuntosPesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Corrosão e Protecção de Materiais

versão impressa ISSN 0870-1164

Corros. Prot. Mater. v.26 n.3 Lisboa jul. 2007

 

Protecção catódica de estruturas de betão armado

Zita Lourenço(1)

 

 Resumo

A corrosão das armaduras, devido à contaminação do betão por cloretos, é o factor que mais contribuí para a deterioração de estruturas de betão armado expostas a ambientes marítimos. A protecção catódica é uma das técnicas electroquímicas mais utilizadas para controlo do processo de corrosão neste tipo de estruturas. Recentementemente, a protecção catódica é também utilizada em estruturas novas, e instalada durante a fase de construção, como técnica de prevenção da corrosão - prevenção catódica. Este artigo descreve o tipo de sistemas de protecção catódica mais utilizados, tipos de ânodos, métodos de instalação, critério de protecção, etc. A instalação do sistema de protecção catódica, durante a fase de construção do Cais de Carga Geral do Porto de Aveiro, é apresentado como exemplo de aplicação desta técnica a uma nova estrutura.

 Palavras Chave: Controlo da Corrosão, Protecção Catódica, Prevenção Catódica, Ânodos, Betão Armado.

 

Cathodic protection of reinforced concrete structures

 

Abstract

The major cause of deterioration of reinforced concrete structures, exposed to marine environments, is the corrosion of the reinforcing steel caused by chloride contamination of the concrete surrounding the steel. Cathodic protection is one of the most used electrochemical techniques to control the corrosion process on this type of structures. Recently, cathodic protection has also been used to prevent the onset of corrosion in new structures, in order to avoid their premature deterioration - cathodic prevention. This paper describes the types of cathodic protection systems used, the different anode systems, installation methods, protection criteria, etc. The installation of a cathodic protection system, during construction of the Cais de Carga Geral- Port of Aveiro is presented, as an example of application to new structures.

 Keywords: Corrosion Control, Cathodic Protection, Cathodic Prevention, Anodes, Reinforced Concrete Structures.

 

 

 Texto completo disponível apenas em PDF.

Full text only available in PDF format.

 

 

Referências

 

[1] C. L. Page (Corrosion and Corrosion Control of Steel in Concrete) in Proceedings of the 2nd International Conference and Exhibition, paper 21, June, England (1989).        [ Links ]

[2] M. Forsyth and M. Z. Lourenço, (Corrosion and Protection of Steel in Concrete), Corrosion & Materials, 22, 13 (1997).

[3] J. Broomfield, (Anode Selection for Protection of RCS), Mater. Performance, 46, 1, 26 (2007).

[4] FHWA, Report RD-83/048 (1983).

[5] J. Broomfield, (International Development and Growth), in Proceedings of the Cathodic Protection of Reinforced Concrete Structures, SCPRC, London, UK (1994).

[6] M. Z. Lourenço, (Recent Developments in the Application of Cathodic Protection to Reinforced Concrete Structures), in Proceedings of the New Zealand Concrete Society, Concrete 93, Outubro, Auckland, New Zeland (1993).

[7] M. Tettamanti et al., Mater. Performance, 36, 9, 21-25 (1997).

[8] R. Moura, F., Duarte, (Protecção Catódica Em Betão Armado na Ponte Ferroviária de Portimão), Corros. Prot. Mater, 24, 4, 108 (2005).

[9] EN 12696:2000, (Cathodic Protection of Steel in Concrete), CEN, Brussels, Belgium (2000).

[10] NACE-RP0290:2000, (Impressed Current Cathodic Protection of Reinforced Steel in Atmospherically Exposed Concrete Structures), NACE, Houston (2000).

[11] Z. Chaudhary, Mater. Performance, Vol. 41, 12, 22 (2002).

[12] Z. LourenÇo, (Depolarization Characteristics of Cathodically Protected Reinforced Concrete Structures), Corrosion Engineering-online. Edition July 2002. http://www.corrosionsource.com/corrosioneering/index.htm

[13] AS 2832-5:2002, (Cathodic Protection of Metals - Steel in Concrete Structures), Australian Standards, Australia (2002).

 

 

(1) Zetacorr- Serviços e Tecnologia de Prevenção à Corrosão, Lda., Rua Joaquim Maria Simões, 8, 2560-281 Torres Vedras, Portugal, e-mail: zetacorr@sapo.pt

 

Artigo submetido em Março de 2007 e aceite em Abril de 2007