SciELO - Scientific Electronic Library Online

 
vol.18 issue1-2Desgaste de ferramentas de soldadura por ultra-sons na produção de cablagens eléctricas para automóveisReciprocating lubricated sliding on textured steel surfaces author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Ciência & Tecnologia dos Materiais

Print version ISSN 0870-8312

C.Tecn. Mat. vol.18 no.1-2 Lisboa Jan. 2006

 

Comportamiento tribológico de materiales cerámicos de nitruro de silicio texturados

 

M. Belmonte(1), A. de Pablos(1), P. Miranzo(1), M.I. Osendi(1), J.R. Gomes(2)*

 

(1)Instituto de Cerámica y Vidrio, CSIC, Campus de Cantoblanco, C/Kelsen S/N, 28049 Madrid, España.

 (2)* Departamento de Engenharia Mecânica, CIICS, Universidade do Minho,

Campus de Azurém, 4800-058 Guimarães, Portugal.

jgomes@dem.uminho.pt

 

 

ABSTRACT: Dense textured Si3N4 materials have been processed adding β-Si3N4 seeds and promoting their alignment with a combined processing/sintering route that includes extrusion and hot-pressing. These materials present a strong anisotropy in the microstructure that leads to anisotropic mechanical and tribological properties. Dry reciprocating self-mated ball-on-flat wear tests have been performed. The textured material presents a higher wear resistance than the reference one, non-textured, being abrasion by microcracking and pull-out of the Si3N4 grains the main wear mechanism. The surface of the textured specimen is protected by a third body developed during the wear test.

Keywords: Tribological behaviour; Silicon nitride; Textured materials.

 

RESUMEN: Se han fabricado materiales densos de nitruro de silicio (Si3N4) texturados incorporando semillas de β- Si3N4, favoreciendo su alineación mediante extrusión de las piezas en verde y prensado en caliente. Estos materiales presentan elevada anisotropía microestructural que conduce a un comportamiento anisótropo de sus propiedades, tanto mecánicas como tribológicas. Se han realizado ensayos de desgaste en seco mediante movimiento recíproco lineal de pares homólogos con geometría esfera-placa. El material texturado presenta mayor resistencia al desgaste que el de referencia, sin texturar, identificándose como principal mecanismo de desgaste la abrasión debida a microfractura y arranque de granos de Si3N4. En este material, además, se desarrolla un tercer cuerpo que protege la superficie del material.

Palavras llave: Comportamiento tribológico; Nitruro de Silicio; Materiales texturados.

 

 

Texto completo disponível apenas em PDF.

Full text only available in PDF format.

 

 

REFERENCIAS

[1] G. Petzow, M. Herrmann, Struc. Bond. 102 (2002) 47.        [ Links ]

[2] K. Hirao, T. Nagaoka, M. E. Brito, S. Kanzaki, J. Am. Ceram. Soc. 77 (1994) 1857.

[3] H. Imamura, K. Hirao, M. E. Brito, M. Toriyama, S. Kanzaki, J. Am. Ceram. Soc. 83 (2000) 495.

[4] M. Nakamura, K . Hirao, Y. Yamauchi, S. Kanzaki, J. Am. Ceram. Soc. 84 (2001) 2579.

[5] M. Nakamura, K . Hirao, Y. Yamauchi, S. Kanzaki, Wear 252 (2002) 484.

[6] M. Nakamura, K . Hirao, Y. Yamauchi, S. Kanzaki, Wear 254 (2003) 94.

[7] Y.N. Liang, S.W. Lee, D.S. Park, Wear 225-229 (1999) 1327.

[8] P. Miranzo, J.S. Moya, Ceram. Inter. 10 (1984) 147.

[9] J. Dusza, T. Eschner, K. Rundgren, J. Mater. Sci. Lett. 16 (1997) 1664.