SciELO - Scientific Electronic Library Online

 
vol.24 número4Corrosion behaviour of 1018, 410 and 800 steels in synthetic wastewater índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Portugaliae Electrochimica Acta

versión impresa ISSN 0872-1904

Port. Electrochim. Acta v.24 n.4 Coimbra  2006

 

New alkaline copper electroplating bath based on an inorganic complexing agent

Masoud Rafizadeh,a Majid Bahmani,b,* Reza T. Chelarasa

a) Department of Chemistry, University of Tarbiat Moalem, Shahid Mofateh Street, Tehran, Iran

b)Research Institute of Petroleum Industry, Catalyst Division, P.O. Box: 18745-4163, Pazhooheshgah Blvd. Khairabad, Old Qom Road, Tehran, Iran

 

Received 25 September 2004, accepted October 2006

 

Abstract

A new alkaline electrolytic solution based on ammonia for copper electroplating has been investigated. Upon addition of alkaline metal hydroxide solution and ammonia followed by the immediate addition of a strong inorganic acid, a highly exothermic reaction takes place. At optimum solution condition ammonia remains in solution as NH2 and forms a complexing agent.

Keywords: copper electroplating, alkaline bath, non-cyanide.

 

Texto disponível em PDF

Full text only in PDF format

 

References

1.     V.A. Lamb, D.R. Valentine, Plating 52 (1965) 1289.         [ Links ]

2.     V.A. Lamb, D.R. Valentine, Plating 53 (1966) 86.

3.     V.A. Lamb, D.R. Valentine, C.E. Johnson, J. Electrochem. Soc. 117 (1970) C291, C341.

4.     U. Bertoucci and D.R. Turner, in A.J. Bard (Ed.), ‘Encyclopedia of Elements’, (1974) II-6, p. 465.

5.     F.A. Lowenheim. “Modern Electroplating”, John Wiley & Sons, New York, 1974.

6.     N.V. Parthasaradhy, “Practical Electroplating”, Practice Hall, NJ, 1989.

7.     D. Chu, P.S. Fedkiw, J. Electroanal. Chem. 345 (1993) 107.

8.     R.E. Sinitski, V. Srinivasan, R. Haynes, J. Electrochem. Soc. 127 (1980) 47.

9.     J. Horner, Plat. Surf. Finish. 85 (1998) 42.

10.   R.Y. Ying, R. Moy, L.C. Fraser, S. O’Bannion, F.M. Donahue, J. Electrochem. Soc. 135 (1988) 654.

11.   F.M. Donahue, J. Electrochem. Soc. 127 (1980) 51.

12.   F.M. Donahue, K.L.M. Wong, R. Bhala, J. Electrochem. Soc. (1980) 2340.

13.   F.M. Donahue, D.J. Sajkowski, A.C. Bosio, L.L. Schafer, J. Electrochem. Soc. 129 (1982) 717.

14.   M. Matsuoka, J. Murai, C. Iwakura, J. Electrochem. Soc. 139 (1992) 2466.

15.   V. Alvarez, S. Gonzalez, A. Arevalo, Electrochim Acta 29 (1984) 1187.

16.   D. Stoychev, C. Tsvetanov, J. Appl. Electrochem. 26 (1996)

17.   J.C. Fabricius, K. Kontturi, G. Sundholm, J. Appl. Electrochem. 26 (1996) 1179.

18.   Y. Shingaya, H. Matsumoto and M. Ito, Surf. Sci. 335 (1995).

19.   V.A. Lamb, D.R. Valentine and C.E. Johnson, J. Electrochem. Soc. 117 (1970) C291, C341.

20.   L.G. Durney. “Electroplating Engineering Handbook”, 4th edition, 1984.

21.   McCoy, U.S. Patent, 2,411, 674, 1946.

 

*Corresponding author. E-mail address: bahmani61@yahoo.com

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons