Fernando Caldeira Jorge1*, Paulo Brito**, Lina Pepino***, António Portugal****, Helena Gil**** e Rui Pereira da Costa*****
*Investigador WOODTECH – Consultadoria e Intermediação Tecnológica para as Indústrias dos Produtos Florestais, Lda. Rua da República, 198 – Alagoas – 3810 159 AVEIRO
** Estudante de Doutoramento, ***Bolseira e
****Professor Associado Departamento de Engenharia Química. Universidade de Coimbra, Polo II, Pinhal de Marrocos, 3030-290 COIMBRA
*****Director-Geral Bresfor. Indústria do Formol, Apartado 13, 3834-908 GAFANHA DA NAZARÉ
]]> Sumário. Com o objectivo de contribuir para a utilização e valorização do resíduo abundante que é a casca de pinheiro bravo em Portugal, são revistos vários métodos de extracção de casca ou de cerne de algumas espécies florestais para a obtenção de extractos taninosos, com especial destaque para a casca de pinheiro. Discute-se a utilização desses extractos na preparação de adesivos para madeira ou derivados de madeira, nas vertentes de resinas só com extracto, com extracto e resina sintética, resinas de cura a frio e como captadores de formaldeído.
Palavras-chave: taninos; extracção; adesivos; revisão
Abstract. With the objective of increasing the use and value of maritime pine bark in Portugal, which is an abundant residue, this paper reviews several methods for the extraction of tannin-rich extracts from the bark or heartwood of some forest species, with an emphasis on pine bark. The utilisations of such extracts are discussed as applied to the preparation of adhesives for wood and wood-derivatives, including resins based solely on these extracts, with extract and synthetic resin, with cold set resins and as formaldehyde scavengers.
Key words: tannins; extraction; adhesives; review
Résumé. Pour contribuer à l'utilisation et à la valorisation d'un résidu abondant au Portugal qu'est l'écorce de pin maritime, on revoit dans ce texte quelques méthodes d'extraction de l'écorce ou du cerne de quelques espèces forestières pour obtenir des extraits riches en tannins, en insistant sur l'écorce du pin. On discute l'utilisation de ces extraits dans la préparation des adhésifs pour le bois ou dérivés du bois, dans le cas des résines préparées seulement avec extrait, avec extrait et résine synthétique, résines de cure à froid ou comme captateur de formaldéhyde.
Mots clés: tannins; extraction; adhésifs; révisio
]]> Texto completo disponível apenas em PDF.
Full text only available in PDF format.
Referências
CALVÉ, L., MWALONGO, G. C.J., MWINGIRA, B. A., RIEDL, B., SHIELDS, J.A., 1995. Characterization of wattle tannin based adhesives for Tanzania. Holzforsch. 49(3) : 259-268. [ Links ]
CAMERON, F.A., PIZZI, A., 1986. Tannin-induced formaldehyde release depression in urea-formaldehyde particleboard. ACS Symposium Series, Vol. 316 : 198-201. [ Links ]
CHEN, C.M., 1982. Copolymer resins of bark and agricultural residue extracts with phenol and formaldehyde: 40 percent weight of phenol replacement. Forest Prod. J. 32(11/12) : 14-18. [ Links ]
CHEN, C.M., 1992. Bonding flakeboards with copolymer resins made of tree foliage extracts, phenol, and formaldehyde. Holzforsch. 46(5) : 433-438. [ Links ]
CHEN, C.M., CHEN, T.-Y., DONG, J., 1993. Bonding flakeboard of Taiwanese woods with copolymer resins of peanut hull extracts, phenol and formaldehyde. Holzforsch. 47(5) : 435-438. [ Links ]
DALTON, L.K., 1950. Tannin-formaldehyde resins as adhesives for wood. Aust. J. Appl. Sci. 1 : 54-70. [ Links ]
FECHTAL, M., RIEDL, B., 1993. Use of Eucalyptus and Acacia molissima bark extract-formaldehyde adhesives in particleboard manufacture. Holzforsch. 47(4) : 349-357. [ Links ]
JORGE, F.C., BRITO, P., PEPINO, L., PORTUGAL, A., GIL, H., PEREIRA DA COSTA, R., 1999b. Resultados não publicados. [ Links ]
JORGE, F.C., BRITO, P., PEPINO, L., PORTUGAL, A., GIL, H., PEREIRA DA COSTA, R., 1999a. Improved extraction of pine bark for wood adhesives. Proc. 3rd European Panel Products Symposium, Llandudno, Wales, 6-8 Oct. [ Links ]
JORGE, F.C., NETO, C.P., IRLE, M., GIL, H., PEDROSA DE JESUS, J., 1998. Wood adhesives based on self-condensation of pine bark tannins. Proc. 2nd European Panel Products Symposium, Llandudno, Wales, 21-22 Sept. [ Links ]
JORGE, F.C., NETO, C.P., IRLE, M., LAWTHER, M., GIL, H., PEDROSA DE JESUS, J.,1997. Pine bark extract-based adhesives. A first approach in Portugal: problems and perspectives. Proc. 1st European Panel Products Symposium, Llandudno, Wales, 9-10 Oct., 1997. [ Links ]
KREIBICH, R.E., HEMINGWAY, R.W., 1987. Condensed tannin-sulfonate derivatives in cold-setting wood-laminating adhesives. Forest Prod. J. 37(2) : 43-46. [ Links ]
LONG, R., 1991. Quebracho based polyphenols for use in wood panel adhesive system. Holz Roh- Werks. 49 : 485-487. [ Links ]
PIZZI, A., 1978. Wattle-based adhesives for exterior grade particleboards. Forest Prod. J. 28(12) : 42-47. [ Links ]
PIZZI, A., 1979a. Phenolic and tannin-based adhesive resins by reactions of coordi-nated metal ligands. I. Phenolic chelates. J. Appl. Polym. Sci. 24 : 1247-1255. [ Links ]
PIZZI, A., 1979b. Phenolic and tannin-based adhesive resins by reactions of coordinated metal ligands. II. Tannin adhesive preparation, characteristics, and application. J. Appl. Polym. Sci. 24 : 1257-1268. [ Links ]
PIZZI, A., 1980. Exterior wood adhesives by MDI crosslinking of polyflavonoid tannin B rings. J. Appl. Polym. Sci. 25 : 2123-2127. [ Links ]
PIZZI, A., 1982. Pine tannin adhesives for particleboard. Holz Roh Werks. 40: 293-301. [ Links ]
PIZZI, A., 1983. Tannin-based wood adhesives. In Wood Adhesives, Chemistry and Technology. A. Pizzi, ed. Marcel Dekker, Inc., New York. [ Links ]
PIZZI, A., CAMERON, F.A., 1981a. Decrease of pressing temperature and adhesive comtent by metallic ion analysis in tannin-bonded particleboard. Holz Roh-Werks. 39 : 463-467. [ Links ]
PIZZI, A., CAMERON, F.A., 1981b. A new hardner for tannin adhesives for exterior particleboard. Holz Roh-Werks. 39: 255-259. [ Links ]
PIZZI, A., DALING, G.M.E., 1980. Laminating wood adhesives by generation of resorcinol from tannin extracts. J. Appl. Polymer Sci. 25 : 1039-1048. [ Links ]
PIZZI, A., MEIKLEHAM, N., DOMBO, B., ROLL, W., 1995. Autocondensation-based, zero-emission, tannin adhesives for particleboard. Holz Roh- Werks. 53 : 201-204. [ Links ]
PIZZI, A., OROVAN, E., CAMERON, F.A., 1988. Cold-set tannin-resorcinol-formaldehyde adhesives of lower resorcinol content. Holz als Roh- und Werks. 46 : 67-71. [ Links ]
PIZZI, A., ROUSSOUW, D. du T., KNUFFEL, W.E., SINGMIN, M., 1980. Honeymoon phenolic and tannin-based fast-setting adhesive systems for exterior grade finger-joints. Holzforsch. Holzverwert. 32(6) : 140-150. [ Links ]
PIZZI, A., SCHARFETTER, H., KES, E.W., 1981. Adhesives and techniques open new possibilities for the wood processing industry. Part 1. Experience with tannin based adhesives. Holz Roh-Werks. 39 : 85-89. [ Links ]
PIZZI, A., STEPHANOU, A., 1994. Fast vs. slow-reacting non-modified tannin extracts for exterior particleboard adhesives. Holz Roh- Werks. 52: 218-222. [ Links ]
PIZZI, A., VALENZUELA, J., WESTERMEYER, C., 1994. Low formaldehyde emission, fast pressing, pine and pecan tannin adhesives for exterior particleboard. Holz Roh-Werks. 52 : 311-315. [ Links ]
PIZZI, A., VON LEYSER, E.P., VALENZUELA, J., CLARK, J.G., 1993. The chemistry and development of pine tannin adhesives for exterior particleboard. Holzforsch. 47(2) : 168-174. [ Links ]
ROUSSOW, D.T., PIZZI, A., McGILLIVRAY, G., 1980. The kinetics of condensation of phenolic polyflavonoid tannins with aldehydes. J. Polym. Sci., Polym. Chem. Ed., 18 : 3323-3343. [ Links ]
ROUX, D.G., FERREIRA, D., HUNDT, H.K.L., MALAN, E., 1975. Structure, stereochemistry, and reactivity of natural condensed tannins as basis for their extended industrial application. Appl. Polym. Symp. 28 : 335-353. [ Links ]
SANTANA, M.A.E., BAUMANN, M.G.D., CONNER, A.H., 1995. Resol resins prepared with tannin liquified in phenol. Holzforsch. 49(2): 146-152. [ Links ]
SANTANA, M.A.E., BAUMANN, M.G.D., CONNER, A.H., 1996. Phenol-formaldehy-de plywood adhesive resins prepared with liquefied bark of black wattle (Acacia mearnsii). J. Wood Chem. Technol. 16(1) : 1-19. [ Links ]
TISLER, V. et al., 1998. Possibility of Tannin Production in Slovenia. Holzforsch. Holzverwert< 50(1) : 11-13. [ Links ]
VÁZQUEZ, G., ANTORRENA, G., FRANCISCO, J.L., ARIAS, M.C., GONZÁLEZ, J., 1993. Exterior plywood resins formulated from Pinus pinaster bark extracts. Holz Roh-Werks. 51 : 221-224. [ Links ]
VÁZQUEZ, G., ANTORRENA, G., FRANCISCO, J.L., GONZÁLEZ, J., 1992. Properties of phenolic-tannin adhesives from Pinus pinaster bark extracts as related to bond quality in Eucalyptus plywoods. Holz Roh- Werks. 50 : 253-256. [ Links ]
VÁZQUEZ, G., ANTORRENA, G., PARAJÓ, J.C., 1986. Selection of operational conditions in alkaline lixiviation of Pinus pinaster bark. Holz Roh-Werks. 44 : 415-418. [ Links ]
VÁZQUEZ, G., ANTORRENA, G., PARAJÓ, J.C., 1987a. Studies on the utilization of Pinus pinaster bark. Part 1. Chemical constituents. Wood Sci. Technol. 21 : 65-74. [ Links ]
VÁZQUEZ, G., ANTORRENA, G., PARAJÓ, J.C., 1987b. Studies on the utilization of Pinus pinaster bark. Part 2. Kinetics and yields of alkaline extractions. Wood Sci. Technol. 21 : 155-166. [ Links ]
VÁZQUEZ, G., ANTORRENA, G., PARAJÓ, J.C., FRANCISCO, J.L., 1989. Preparation of wood adhesives by polycondensation of phenolic acids from Pinus pinaster bark with resoles. Holz Roh- Werks. 47 : 491-494. [ Links ]
YAZAKI, Y., COLLINS, P.J., 1994a. Wood adhesives from Pinus radiata bark. Holz Roh- Werks. 52 : 185-190. [ Links ]
YAZAKI, Y., COLLINS, P.J., 1994b. Wood adhesives based on tannin extracts from barks of some pine and spruce species. Holz Roh- Werks. 52 : 307-310. [ Links ]
ZHAO, L., CAO, B., WANG, F., YAZAKI, Y., 1994. Chinese wattle tannin adhesives suitable for producing exterior grade plywood in China. Holz Roh- Werks. 52: 113-118. [ Links ]
]]> Submetido para publicação em Janeiro de 2001
Aceite para publicação em Outubro de 2001
1 1º Autor E-mail: mail@woodtech.pt
]]>