25 2Pitting Corrosion of Some Stainless Steel Alloys Preoxidized at Different ConditionsCapacitance of the Double Layer at Polycrystalline Au-Ag Electrodes: Influence of Preparation Technique and Specific Anion Adsorption 		Home Page  

  • SciELO

  • SciELO

Portugaliae Electrochimica Acta

 ISSN 0872-1904

DUBEY, A.K.    SINGH, G.. Corrosion Inhibition of Mild Steel by Using Cetyl Pyridinium Bromide (CPB) . []. , 25, 2, pp.249-262. ISSN 0872-1904.

The corrosion inhibition of mild steel in one normal sulphuric acid solution by CPB has been studied in relation to the concentration of the inhibitor as well as the temperature using electrochemical polarization (galvanostatic and potentiostatic) techniques. The results were supplemented with scanning electron microscopy and infra-red spectroscopy. All the methods employed are in reasonable agreement. There is no particular relationship of inhibition with concentration and temperatures. The thermodynamic functions of dissolution and adsorption processes were calculated from experimental polarization data and the interpretation of the results are given. Adsorption of CPB was found to follow the Langmuir’s adsorption isotherm. Brij-30 is a mixed type of inhibitor.

: cetyl pyridinium bromide (CPB); corrosion inhibitors; mild steel; H2SO4; adsorption process; SEM; infra-red spectroscopy.

        ·     · ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License

Professor Doutor Víctor M.M. Lobo
Departamento de Química da Universidade de Coimbra
3004-535 Coimbra